768 views Yuda Electronic (HK) Technology Co.,Limited. 2018-05-24
1. First turn off the phone, then use a screwdriver to remove the bottom two sets of screws
2. After the screws are unloaded, use the prepared open tool to assist in opening the screen
3.Because the iphone 6S screen edge is not using adhesive, the screen opener can easily be opened
4.Pull open and slowly open the screen from bottom to top
5.Hang the screen 90 degrees and find something that can be fixed and secure it with rubber bands
6.If you are professional, you can directly replace the battery and wirelessly disassemble the screen (otherwise continue to see the tutorial)
7.Then remove the power btb fixed cover screw
8.Remove the fixed cover with tweezers
9.Disconnect the btb with a crowbar
10.Then remove the btb fixing cover screw and remove the cover
11.Use a crowbar to disconnect the screen cable one by one
12.Use a crowbar to disconnect the screen cable one by one
13.In this way, screen can be successfully separated
14.Next, tear the bottom tape of the battery with tweezers
15.Pull the tape out by hand
16.After the tape is completely pulled out of the battery, the battery can be easily removed. If the tape is pulled off, use a plastic sheet to assist in the removal.
17.Place the new battery with adhesive in the battery compartment
18.Then install the fixing cover and screws
19.Put btb on and attach the fixing cover and screws
20.Insert the top of the screen into the body and slowly close it
21.Note that the screen must be closed from the top
22.Then slowly cover the screen, cover it and carefully press the lower edge so that it is homed to the correct position
23.Finally, install the bottom two screws. The boot can be used normally.
Cell phone accessories wholesale business can get high profits. But the market is fierce. Big bra...
Does fast charging reduce phone battery life？ In order to allow everyone to understand this matt...
How to install the car charger: 1. Insert the USB power adapter into the car cigarette lig...
